Dell 3110cn Service Manual page 331

Removal 32 HIGH VOLTAGE POWER SUPPLY (PL5.1.17)
11)
11)
11)
11)
10) Remove the two screws (silver, with washer, 6mm) that fix the two harnesses of the HIGH
VOLTAGE POWER SUPPLY.
11) Remove five screws (silver, tap, 10mm) and threescrews (silver, 6mm) that fix the HIGH
VOLTAGE POWER SUPPLY to the printer.
12) Remove the HIGH VOLTAGE POWER SUPPLY by releasing the upper part of the HIGH
VOLTAGE POWER SUPPLY from the two lugs on the printer. Pull out the connector of the
HIGH VOLTAGE POWER SUPPLY from the hole on the printer.
Version 2 2006.03.31
12)-2
12)-1
11)
10)
11)
10)
11)
11)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 57
Kmy03046KA