Dell 3110cn Service Manual page 411

Replacement 35 OPERATOR PANEL (PL1.2.97)
4) Replace the LATCH FRONT to the FRONT COVER together with the PLATE LATCH by mat-
ing the left and right side slits of the LATCH FRONT with the studs on the FRONT COVER.
5) Secure the left and right sides of the LATCH FRONT to the FRONT COVER using the two
screws (silver, with flange, tap, 10mm).
6) Anchor the SPRING LATCH to the hole on the PLATE LATCH and the peg on the FRONT
COVER.
Continues to the next page.
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
6)
5)
3 - 137
5)
4)
Kmy03133KA