Dell 3110cn Service Manual page 383

Replacement 22 LEFT ARM ASSEMBLY(PL7.1.97)
5) Replace the SUPPORT LINK L by mating the two holes of the SUPPORT LINK L with the
bosses on the printer.
6) Secure the SUPPORT LINK L using the three screws (silver, tap, 8mm).
7) Mate the fitting hole on the LINK L with the left side fitting hole on the FRONT COVER.
Insert the SHAFT PIVOT and secure with the hook.
Go to the next replacement step:
Replacement 24 LEFT COVER (PL1.1.7)
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
6)
6)
6)
3 - 109
7)-1
7)-2
Kmy03096KB