Convenience Closing Feature - Mercedes-Benz S-Class Operator's Manual

Hide thumbs Also See for S-Class:
Table of Contents

Advertisement

X
To unlock the vehicle: pull the door
handle.
X
To lock the vehicle: touch sensor
surface :.
X
Convenience closing feature: touch
recessed sensor surface ; for an
extended period (
Y
If you pull on the handle of the trunk lid, only
the trunk of the vehicle is unlocked.
Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that only the driver's
door and the fuel filler flap are unlocked. This
is useful if you frequently travel on your own.
X
To change the setting: press and hold
down the % and & buttons
simultaneously for approximately six
seconds until the battery check lamp
(
Y
page 82) flashes twice.
i
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the & or % button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
X
To unlock the driver's door: press the
% button once.
X
To unlock centrally: press the %
button twice.
X
To lock centrally: press the & button.
The KEYLESS-GO function is changed as
follows:
X
To unlock the driver's door: pull the door
handle on the driver's door.
X
To unlock centrally: pull the door handle
on the front-passenger door or on the rear
doors.
X
To lock centrally: touch the outer sensor
surface on one of the door handles.
page 94).
I n f o r ma t i o n P r o v i d e d b y :
Restoring the factory settings
X
Press the % and & buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice.
Mechanical key
General notes
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the
anti-theft alarm system will be triggered
(
Y
page 75).
There are several ways to turn off the alarm:
X
To turn the alarm off with the
SmartKey: press the % or & button
on the SmartKey.
or
X
Insert the SmartKey into the ignition lock.
or
X
To deactivate the alarm with KEYLESS-
GO: press the Start/Stop button in the
ignition lock. The SmartKey must be in the
vehicle.
or
X
Lock or unlock the vehicle using KEYLESS-
GO. The SmartKey must be outside the
vehicle.
Removing the mechanical key
SmartKey
81
Z

Advertisement

Table of Contents
loading

Table of Contents