Mercedes-Benz S-Class Operator's Manual page 202

Telephone
200
X
To reject: select
the COMAND controller and press W to
confirm.
or
X
Press the ~ button on the telephone
keypad or on the multifunction steering
wheel.
X
To accept: confirm
W.
or
X
Press the 6 button on the telephone
keypad.
or
X
Press the 6 or ? button on the
multifunction steering wheel.
Once you have accepted the call, you can use
hands-free mode. The call volume can be
adjusted ( Y page 134). For more information,
see the "Functions available during a call"
section ( Y page 201).
The display shows the phone number or the
name and phone number (if the entry is stored
in the address book) or shows the
(phone number withheld) message.
i You can also accept a call as described
above when COMAND is showing the
display of a different main application. The
display switches to the telephone display
after a call is accepted using the COMAND
controller or the telephone keypad. After
the call is finished, you see the display of
the previous main application again.
Reject
by turning cVd
Accept
by pressing
Unknown
Making a call
Entering a telephone number using the
telephone keypad
X
Call up the telephone basic menu
( Y page 198).
X
Enter all the digits of the phone number
using the telephone keypad.
X
To make a call: press the 6 button on
the telephone keypad or on the
multifunction steering wheel.
Entering a telephone number using the
telephone basic menu
X
Call up the telephone basic menu
( Y page 198).
X
Select the digits one by one by turning
cVd and sliding ZVÆ the COMAND
controller and press W to confirm.
X
To make a call: select
telephone basic menu and press W to
confirm.
or
X
Press the 6 button on the telephone
keypad or on the multifunction steering
wheel.
Redialing
X
Call up the telephone basic menu
( Y page 198).
X
Press the 6 button on the telephone
keypad.
or
X
SEND
Select from the telephone basic menu
and press W to confirm.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X
To select a call: select an entry by turning
cVd the COMAND controller and press
W to confirm.
I n f o r ma t i o n P r o v i d e d b y :
SEND
from the