Mercedes-Benz S-Class Operator's Manual page 270

Vehicle
268
change settings for automatic climate
R
control on the front-passenger side using
COMAND
press one of the rocker switches to operate
R
automatic climate control on the front-
passenger side
press one of the rocker switches on the
R
rear-compartment control panel
Adjusting the footwell temperature
You can use the
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Footwell Temperature
Select
W.
A scale appears.
X
To change the temperature difference:
slide ZVÆ or turn cVd.
X
To confirm your selection: press W.
Footwell Temperature
and press
Setting the blower settings for the air
vents
This function allows you to determine the way
the air is blown through the air vents in
automatic mode.
You can select:
Focused
(high blower setting)
R
Medium
(standard setting)
R
Diffuse
(low blower setting)
R
i This setting is quite effective in automatic
mode, especially at high outside
temperatures.
If the vehicle has become very warm and the
automatic air conditioning is cooling the
interior, the blower settings are briefly
canceled.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Select Airflow
A menu appears.
The current setting is indicated by a # dot.
X
To change the airflow: slide ZVÆ or turn
cVd.
X
To confirm your selection: press W.
Operating the rear-compartment air-
conditioning system from the front
The rear-compartment air-conditioning
system is operated in the same way as
I n f o r ma t i o n P r o v i d e d b y :
and press W.