Mercedes-Benz S-Class Operator's Manual page 145

Indicator lamp displays
The indicator lamp displays the following
possible stati for the batteries and
headphones:
Display Status
Green The batteries are fine.
Red The batteries are almost
discharged.
Continuou The headphones are switched
sly lit on and connected to a screen.
either
green or
red
Flashes The headphones are
either searching for the connection
green or to a screen.
red
No display The headphones are switched
(dark) off or the batteries are
discharged.
Connecting additional headphones
You can connect an additional set of corded
headphones to each rear-compartment
screen ( Y page 139).
Changing batteries
Batteries are required for the remote control
and for the two sets of cordless headphones.
Changing batteries ( Y
System settings
Display settings
Switching the display on/off
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Select Display OFF
COMAND controller and press W to
confirm.
page 247)
by turning cVd the
I n f o r ma t i o n P r o v i d e d b y :
X
To switch on the display: press W or
cVd turn the COMAND controller.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
System
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display
Select and press W to confirm.
X
Day Mode, Night Mode
Select
Automatic
by turning cVd the COMAND
controller and press W to confirm.
The # icon indicates the current setting.
Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode
The display is set
permanently to night
design.
Automatic The display design
changes depending on
the brightness around
the vehicle.
Automatic
i In the
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
System settings
or
setting, COMAND
143
Z