Entering Characters - Mercedes-Benz S-Class Operator's Manual

At a glance
132
i You will find further information in the
"Destination entry" section (
Entering characters in the address and
the phone book
Introduction
The following section describes how to enter
characters in the phone book/address book
when creating a new entry.
Creating a new entry in the phone book
X
Call up the input menu with data fields
( Y page 206).
Phone book: input menu with data fields
Selected data field with cursor
:
Character bar
;
Creating a new entry in the address book
X
Call up the input menu with data fields
( Y page 206).
Input menu with data fields
Selected data field with cursor
:
Character bar
;

Entering characters

Y page 153).
The example describes how to enter the
surname Schulz.
X
Select
the COMAND controller and press W to
confirm.
S
characters are shown in black and can
always be selected in the character bar.
The character bar offers characters
corresponding to the respective data field
(letters or digits).
To switch the character bar to upper-
:
case/lower-case letters
To switch the character bar from upper/
;
lower-case letters to digits
To change the language of the character
=
bar
To delete a character/an entry
?
X
Select
COMAND controller.
The letter
X
Repeat the process until the name has
been entered in full.
X
To enter a phone number: select the
digits one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to
confirm.
Switching data fields
If you want to enter a first name after you have
entered a surname, for example, proceed as
follows to switch between the data fields:
I n f o r ma t i o n P r o v i d e d b y :
S
by turning cVd and sliding ZVÆ
is entered into the data field. All
c
and confirm by pressing W the
c
is added to
S
in the data field.