Connecting Up Your Digital Receiver; Connecting To The Antenna; Connecting To Your Television Set - Topfield TF-T6000 User Reference

8 Setup

2.4 Connecting up your digital receiver

There are several ways to set up the digital receiver. Set up the digital
receiver suitably to your television and other devices. If you have any
problem with your setup or need help, contact your dealer.
WARNING
Connect any components before plugging the power cord into the
wall outlet. Always turn off the product, TV and other components
before you connect or disconnect any cables.
NOTE
If you encounter any problems setting up your product, please con-
tact your local retailer.

2.4.1 Connecting to the antenna

NOTE
ANT OUT may also be linked to your television, VCR, or DVD
recorder to loop an analogue signal.

2.4.2 Connecting to your television set

For all the following connections of the digital receiver, we recommend
you to use the first connector to get the best picture quality. If your tele-
vision does not have a matching connector, then use the next connector
in the following order for a better picture quality.
1. HDMI connector (HDMI)
2. Component connector (YPbPr)
3. Composite connector (VIDEO)
You should configure audio and video settings after connecting up the
digital receiver. See §4.1 for a detailed description.
Whatever sort of connection you have between the digital
receiver and the television, you need to connect the digital
receiver to the antenna so that it can receive digital televi-
sion broadcasts. Connect the antenna cable to the ANT IN
connector. If you have another digital receiver, you may
link it from the ANT OUT connector.