Connecting Up Your Digital Receiver; Connecting The Antenna; Connecting To Your Television - Topfield TF 7010 HT User Manual

2.4 Connecting up your digital receiver

2.4.1 Connecting the antenna

2.4.2 Connecting to your television

Table 2.3: Connectors specifications
HDMI High definition video output
Left & right audio output
Dolby digital audio output
VIDEO Composite video (CVBS) output
AUDIO Left & right audio output
S-VIDEO Super video (S-Video) output
YPbPr Component video (YUV) output
RGB Component video (RGB) output
S/PDIF Dolby digital audio output
RS-232 115.2 kbps at maximum
There are several ways to set up the digital receiver. Set up the
digital receiver suitably to your television and other appliances.
If you have any problem with your setup or need help, contact
your dealer.
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connector,
2.4 Connecting up your digital receiver 9
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to
your television antenna so that it can receive
digital television services.
Connect the antenna cable to the ANT IN con-
nector.
If you have another digital receiver, you may
link it from the RF LOOP OUT connector.