10 Setup
To make the audio connection
2.4.3 Connecting to an external device
The digital receiver can also present or record the video from an exter-
nal device such as a DVD player through the Composite or Component
connector.
To switch the output between the digital receiver and the device con-
nected to the AV-IN sockets, press the
the Entertainment > Analog Input menu.
NOTE
When using the AV IN sockets, the input data will be displayed one
second later than the original input data.
(AV Input Audio Level : 2.0 Vrms at maximum)
You need to obtain an audio cable (RCA cable) to link the
audio connectors. Plug one end of the cable into the AUDIO
L (white) and AUDIO R (red) sockets on the digital receiver,
and plug the other ends into the matching sockets on your
television or audio-video receiver.
To enjoy Dolby Digital audio, your television or audio-
video receiver must be able to decode Dolby Digital audio,
and you need to obtain a S/PDIF cable.
Plug one end of the cable into the S/PDIF socket on the
digital receiver, and plug the other end into the matching
socket on your audio-video receiver.
You need a Composite cable (RCA cable) to use the Com-
posite connector. Plug one end of the cable into the VIDEO
(yellow), AUDIO L (white) and AUDIO R (red) sockets on
the digital receiver, and plug the other end into the match-
ing socket on your video recorder or suchlike.
£
¢ ¡
M
button or alternatively select