Topfield TF-T6000 User Reference page 15

To use the HDMI output
In this case, you do not have to make audio connection because it can
output stereo audio or digital audio as well.
To use the Component video output
Y
P b
P r
NOTE
Remember to plug in the additional white and red audio cables from
the digital receiver to the back of your television.
To use the Composite video output
NOTE
You cannot view high definition video by means of the Composite
video output.
2.4 Connecting up your digital receiver 9
If you have a high definition television set, you should use
an HDMI cable for best results. Plug one end of the cable
into the HDMI socket on the digital receiver, and plug the
other end into the matching socket on your television.
You need to obtain a Component video cable (RCA cable)
to use the Component video output. Plug one ends of the
cable into the Y (green), Pb (blue) and Pr (red) sockets on
the digital receiver, and plug the other ends into the match-
ing sockets on your television.
You need to obtain a Composite video cable (RCA cable)
to use the Composite video output. Plug one end of the
cable into the VIDEO (yellow) socket on the digital receiver,
and plug the other end into the matching socket on your
television.