TF-S3000CHD Quick Guide High Definition Digital Satellite Receiver USB PVR-Ready Common Interface Conax Embedded Default PIN: 0000 Full Guide is available at http://www.i-topfield.com...
Precautions • Clean with a dry cloth only. • Do not block any of the ventilation openings. • When placed in a cabinet, make sure there is a minimum space of 10 centimetres around it. • Do not install near any heat sources or in direct sunlight as this will impair cooling.
Rear Panel R - AUDIO - L LNB IN LNB OUT 500mA max. VIDEO S/PDIF HDMI LNB IN Satellite broadcasting signal input socket (Current: Max.500mA with overload protection) LNB OUT Satellite broadcasting signal output socket through the LNB IN socket for an- other digital receiver Audio and video output socket for the television set VIDEO...
Connecting the TV 2. Choose a setup that matches the connection ports on your TV. – We recommend using the HDMI connection for the highest quality HD picture. – For a basic connection to your television use the Scart or composite connection. a) HDMI connection (HDMI) REAR OF TV REAR OF DIGITAL RECEIVER...
Page 5
Remote Control • button switches the digital receiver between standby mode and active mode. • is used to set a sleep timer in 10 minute increments. £ £ ¢ ¡ ¢ ¡ • buttons decrease or increase the volume. They are also used to change values for menu options.
Remote Control • resumes normal playback speed, or displays the progress bar for navigation on play- back or time-shift. To play a recorded programme, see button • pauses live television or playback of a recorded programme. • is used to start reverse playback. Subsequent presses increase the rewind speed. •...
Page 7
Service Search 2. If you have a motorized antenna, configure DiSEqC 1.2 or USALS. 2-1. DiSEqC 1.2 settings Your motorized antenna will turn toward your M otorized DiSEqC1.2 M otorized DiSEqC1.2 99% Level desired satellites horizontally by DiSEqC 1.2. 99% Quality Select Installation >...
Network Setup You need to set up a network connection to enjoy web-enabled features on this unit. 1 Connect your Ethernet cable from your router to the digital receiver. £ ¢ ¡ > Installation > Network 2 Press MENU IP Setting IP Setting Setting >...
Page 9
Enjoying Services Favourite services list To display the favourite lists, press the £ but- Favorite List Favorite List ¢ ¡ ton from the service list screen, or press the News News button while watching a live show. Movie Movie If you want to add the current service to the Options Music Music...
Recording and Playback If you want to record a TV programme, you have to connect an external hard drive to the USB port of the digital receiver. NOTE The external hard drive should be formatted in the NTFS file system. It is also recom- mended to use an external power socket to have the external hard drive supplied by its own power.
Page 11
Recording and Playback After a recording has started, pressing the button again displays a menu like the left figure, in which you can set the recording duration. End of recording Duration Duration 30Min 30Min After this program After this program After next program After next program 4.6% (30 Min)