Table of Contents
Advertisement
4.7 Timer operation
(1) Comfortable timer setting (ON timer)
If the timer is set at ON when the operation select switch is set at the cooling or heating, or the cooling or heating in auto mode
operation is selected, the comfortable timer starts and determines the starting time of next operation based on the initial value of 15
minutes and the relationship between the room temperature at the setting time (temperature of room temperature sensor) and the
setting temperature.
(2) Sleep timer operation
Pressing the SLEEP button causes the temperature to be controlled with respect to the set temperature.
(3) OFF timer operation
The Off timer can be set at a specific time (in 10-minute units) within a 24-hour period.
4.8 Installation location setting
When the indoor unit is installed at the end of a room, control the air flow direction so that it is not toward the side walls. If you set the
remote control's installation position, keep it so that the air flow is within the range shown in the following figure.
(1) Setting
1
If the air conditioning unit is running, press the ON/OFF button to stop.
The installation location setting cannot be made while the unit is running.
2
Press the AIR FLOW
AIRFLOW
(LEFT/RIGHT) button together for 5 seconds
or more.
The installation location display illuminates.
3
Setting the air-conditioning installation location.
Press the AIR FLOW
location.
Each time the AIR FLOW
indicator is switched in the order of:
(Center Installation)
4
Press the ON/OFF button.
The air-conditioner's installation location is set.
Press within 60 seconds of setting the installation location (while the
installation location setting display illuminates).
Airflow range
(Left End Installation)
(UP/DOWN) button and the
(LEFT/RIGHT) button and adjust to the desired
(LEFT/RIGHT) button is pressed, the
(Right End Installation)
(Left End Installation)
Airflow range
(Center Installation)
12
-
-
Airflow range
(Right End Installation)
1, 4
2
3
Hide quick links:
Advertisement
Table of Contents
