Qr-Coded Parameter Menu - Denso GT10Q-SU User Manual

13.2 QR-coded parameter menu

Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults)
Start setting
All defaults
The beeper volume can be set by scanning the following QR Code symbol only. No "Start setting" or "End
setting" QR Code symbol required to be scanned.
Adjusting the beeper volume
Scanning this QR Code symbol cycles the beeper volume through High, Medium and Low. The factory default
is High.
Interface to the host
USB-COM interface
(default)
Cancel
Beeper volume
74
Start setting
(When the "White code on
black background" is set)"
End setting
USB keyboard
interface