Connecting The Interface Cable To The Scanner - Denso GT10Q-SU User Manual

2.2

Connecting the interface cable to the scanner

(1) Pull the connector cover of the interface cable off its connector as shown below.
(2) Plug the interface cable connector into the connector located in the bottom of the scanner.
Note: As shown below, hold the scanner body, align the
scanner, and fully insert the interface cable connector.
Connector cover
(3) Align the two bosses on the connector cover with cutouts in the scanner body, fit the connector cover into the
scanner, and turn it clockwise to lock it.
Interface cable connector
mark on the cable connector with that on the
Scanner
mark
Cutout
Boss
Connector cover
3
mark
Connector cover
Turn the cover until the
bosses come to be
horizontal.