Table of Contents
Advertisement
STANDARD INSTALLATION
This type of installation is not suitable for use on roofs over 10 m high.
This type of installation is not suitable for use in cyclonic areas.
WARNING
Collector Rail Pre Assembly
Assemble the collector rail components as shown. Only loosely attach the collector retainers to the rails.
Details of component quantities are shown in the tables on page 14 to 19.
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
Please ensure the collector rails are positioned in the correct orienation against the collector.
WARNING
Rinnai
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
COLLECTOR SUPPORT STRAPS
MOUNTING RAIL
COLLECTOR INSTALLATION
COLLECTOR SUPPORT STRAPS
MOUNTING RAIL
11
Split Collector IM
Advertisement
Table of Contents
