Connecting to a Computer
(1)When using the wireless LAN2 interface, set DSW 3-1 of the
circuit board on the bottom of the printer to ON.
(2)When setting the wireless LAN2 interface setting to the reception
mode, set DSW 3-2 of the circuit board on the bottom of the
printer.
For details regarding dip switch settings, refer to [Dip Switch
Settings].
/Page 29~31
¡Bluetooth interface
(1)When using the Bluetooth interface, set DSW 3-1 of the circuit
board on the bottom of the printer to ON.
For details regarding dip switch settings, refer to [Dip Switch
Settings].
/Page 29~31
Bluetooth interface
The Bluetooth interface board is contained
inside the printer and cannot be seen from
outside.
25