96
C
9: S
HAPTER
TANDARD
Hunt Group
Interaction With
Other Features
F
EATURES
You log in to a hunt group by entering feature code followed by hunt
group number. If you are already logged in, entering the same feature
code and hunt group number logs you out. You can also log in to and log
out of a hunt group through the VCX User Interface (see
Group Membership and
To log in to a hunt group using a feature code:
1 Press Feature + 971.
The Display Panel shows a prompt requesting a hunt group number.
2 Enter the hunt group number, then press #.
The Display Panel indicates that your hunt group login status has
changed.
Alternatively, you can combine steps 1 and 2 by entering the following
single command:
*971*<hunt group number>
You can also log in to a hunt group by pressing Program + 4 + 8
followed by the hunt group number, then press #.
You can display all the hunt groups you are currently logged in to by
pressing Feature + 972 (see
Status).
This section describes how participation in a hunt group interacts with
other VCX phone features. Note the following considerations:
A hunt group call can be added to a conference. The member
receiving the call can conference with another extension or with
another hunt group. Both announced and unannounced conferences
are supported (see
A hunt group call can be put on hold and taken off hold without
losing the caller.
If a hunt group member puts a call on hold, that member can
receive other calls.
A hunt group caller on hold will hear hunt group Music On Hold.
A hunt group call can be parked and then picked up by any user on
the same site.
Status).
Viewing Hunt Group Membership and
Setting up a Conference
Viewing Hunt
Call).