Call Forwarding - 3Com 3102 Manual

84 C 9: S
HAPTER TANDARD

Call Forwarding

F
EATURES
Alternatively, you can skip pressing the Feature button and enter:
*601*2
Note that, with this syntax, you cannot enter *602.
You can also use the following method to dial a speed dial number on
any VCX phone:
1 Press the Program button (or press Feature + 410).
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
The Display Panel lists the first speed dial, for example:
Speed dial 1
1001
Use the up and down scroll buttons to locate the speed dial number
you want to dial.
3 Press the first soft button under the Display Panel.
Your phone dials the number.
You can also press the second soft button under the Display Panel to
enter edit mode. A blinking cursor appears under the first digit in the
displayed speed dial number allowing you to modify the number. Press #
to save the number and exit edit mode.
To exit the speed dial list in the Display Panel, press the third soft button.
In addition to using the Program menu to list speed dial numbers, you
can view the speed dial numbers configured on your phone by pressing
Feature + 463.
This section describes how to enable and use call forwarding features set
up through the TUI using feature codes (see
configure and enable call forwarding through the VCX User Interface. See
Enable Call Forwarding.
You can use the TUI on your phone to specify:
Where you want your call to be forwarded
The condition that results in the system forwarding a call:
:
Chapter 8). You can also