Sony PMW-300K1 Operating Instructions Manual page 54

Registering the customized settings as a
Picture Profile
1
Set the power switch (page 9) to ON to
turn on the camcorder.
2
Press the PICTURE PROFILE button
(page 11).
The PICTURE PROFILE menu is displayed.
3
Using the joystick or the jog dial, select
"SEL," then press the SEL/SET button
or the jog dial.
4
Select the number of the picture profile
to register from the list, then press the
SEL/SET button or the jog dial.
5
Use the joystick or the jog dial to select
"SET," then press the SEL/SET button
or the jog dial.
6
Make each setting (page 55).
7
When the settings have been made,
press the PICTURE PROFILE button.
54 Useful Functions
Selecting a registered Picture Profile
Once you store a picture profile, you can recall
the picture quality registered in the picture
profile.
1
While standing by to record, press the
PICTURE PROFILE button (page 11).
The PICTURE PROFILE menu is displayed.
2
Using the joystick or the jog dial, select
"SEL," then press the SEL/SET button
or the jog dial.
3
Select the number of the picture profile
to use from the list, then press the SEL/
SET button or the jog dial.
If OFF is selected, the picture quality is set to
standard and cannot be changed.
4
Press the PICTURE PROFILE button.
The picture profile being selected is displayed
when you set the DISPLAY switch (page 16) to
ON. You can also select picture profiles with the
Direct menu (page 17).