Formats And Limitations Of Outputs; Video Formats And Output Signals - Sony PMW-300K1 Operating Instructions Manual

Formats and Limitations of Outputs

Video Formats and Output Signals

Output formats for the SDI OUT connector
Serial digital signals from the SDI OUT connector are output depending on the settings of the setup menu
and format of the clip being played.
The output format is converted when using the settings in the following chart.
Notes
• When the format is UDF HD Mode or FAT HD Mode and "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu
is set to "SD SDI & SD HDMI i," a down-converted SD signal is output.
• When "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu is set to other than "HD SDI & HD HDMI" or "SD
SDI & SD HDMI i," signals are not output from the SDI OUT connector.
While recording (or standing by to record)/During clip playback
When recording:
"Format" in "System" in
the OTHERS menu
When playing: Playback
clip video format
HD422 50/1080/23.98P
HQ 1920×1080/23.98P
HQ 1440×1080/23.98P
(23.98P Output:59.94i (2-3 Pull
Down))
SP 1440/23.98P
HD422 50/720/59.94P
HQ 1280×720/59.94P
HD422 50/720/29.97P
HQ 1280×720/29.97P
HD422 50/720/23.98P
HQ 1280×720/23.98P
HD422 50/720/50P
HQ 1280×720/50P
HD422 50/720/25P
HQ 1280×720/25P
1)
59.94i provided through 2-3 pulldown of 23.98P.
2)
59.94i provided through conversion from 59.94P.
3)
59.94P provided by outputting each frame of 29.97P two times.
4)
59.94P provided by repeating each frame of 23.98P two or three times.
5)
50i provided through conversion from 50P.
6)
50P provided by outputting each frame of 25P two times.
Setting of "SDI/HDMI/i.LINK I/O Select" in the VIDEO SET menu
HD SDI & HD HDMI
1)
1920×1080/59.94i
1)
1920×1080/59.94i
1280×720/59.94P
3)
1280×720/59.94P
4)
1280×720/59.94P
1280×720/50P
6)
1280×720/50P
Output format
SD SDI & SD HDMI i
1)
SD/59.94i
1)
SD/59.94i
2)
SD/59.94i
SD/29.97PsF
1)
SD/59.94i
5)
SD/50i
SD/25PsF
Formats and Limitations of Outputs 123