Sony PMW-300K1 Operating Instructions Manual page 101

OTHERS
Menu items Subitems and setting values Contents
Assign Button
<1> to <8>
Off / Marker / Last Clip DEL /
Assigning
ATW / ATW Hold / Rec Review
functions to the
/ Rec / Picture Cache / Freeze
assignable buttons
Mix / Expanded Focus /
Spotlight / Backlight / IR
Remote / Shot Mark1 / Shot
Mark2 / VF Mode / BRT Disp /
Histogram / Lens Info / OK
Mark / Clip Flag OK / Clip Flag
NG / Clip Flag Keep / Clip
Continuous Rec / Color Bars
(Camera/Bars) / Handle Zoom
<1> Lens Info
<2> BRT Disp
<3> Histogram
<4> Camera/Bars
<5> Off
<6> Off
<7> Off
<8> Off
Tally Front / Rear
High / Low / Off
Setting the tally
lamps
Hours Meter Hours (Sys)
Displaying the
Hours (Reset)
hours meter
Reset
Execute/Cancel
Assign a function to the ASSIGN buttons. (The selectable
functions are shared.)
Off: No function
Marker: For turning the safety zone, center marker, aspect
marker and guide frame functions on/off as a group
Last Clip DEL: For executing the last clip delete (retake)
function
ATW: For turning the ATW function on/off
ATW Hold: For turning the ATW hold function on/off
Rec Review: For executing the recording review function
Rec: For starting/stopping recording
Picture Cache: For turning the Picture Cache Recording
function on/off
Freeze Mix: For executing the freeze mix function
Expanded Focus: For turning the expanded focus function on/
off
Spotlight: For enabling and disabling TLCS Spotlight mode
Backlight: For enabling and disabling TLCS Backlight mode
IR Remote: For activating/deactivating the IR Remote
Commander
Shot Mark1: For adding shot mark 1 (HD Mode only)
Shot Mark2: For adding shot mark 2 (HD Mode only)
VF Mode: For switching the viewfinder screen between color
and monochrome
BRT Disp: For turning the brightness level indication function
on/off
Histogram: For turning the histogram indication function on/
off
Lens Info: For switching the depth-of-field indication to
"Off"/"Meter"/"Feet"
OK Mark: For adding or removing an OK mark (HD Mode
only, not valid via the thumbnail screen)
Clip Flag OK: For enabling and disabling OK flags for clips
during recording and playback (UDF only)
Clip Flag NG: For enabling and disabling NG flags for clips
during recording and playback (UDF only)
Clip Flag Keep: For enabling and disabling Keep flags for
clips during recording and playback (UDF only)
Clip Continuous Rec: For turning the Clip Continuous
Recording function on/off
Color Bars (Camera/Bars): For switching between the color
bar and camera signal
Handle Zoom: For switching the zoom operation of the
handle zoom
Set the brightness of the tally lamp.
High: To brighten the lamp
Low: To dim the lamp
Off: To not light the lamp
The non-resettable accumulated time of use is displayed.
The resettable accumulated time of use is displayed.
Select "Execute" to reset the Hours (Reset) value to 0.
Setup Menu List 101