Sony PMW-300K1 Operating Instructions Manual page 21

2
1 Loosen the screw, then 2 remove
the cover of the VF connector.
3
Couple the viewfinder connector to the
VF connector (26-pin).
Viewfinder connector
4
Reattach the cover of the VF connector.
Push the tabs into the slots and slide the cover
over.
Note
Make sure that the cover of the VF connector is attached.
If the cover is not attached, the coupling is loose and
noise may appear on the video.
5
Route the cable as illustrated, using the
clamps.
Adjusting the Viewfinder 21