Sony PMW-300K1 Operating Instructions Manual page 27

• When a non-exclusive lens is mounted for the
first time, it may take about 20 seconds to start
up the camcorder.
Attaching an exclusive lens
To attach the optional 1/2-inch EX Mount lens,
proceed as follows:
The supplied lens once removed can also be
mounted in the same manner.
1
Align the alignment pin of the lens with
the recess at the top of the mount section
of the camcorder and set the lens in
place.
2
Turn the lens mount lever downward.
Attaching a Sony 1/2-inch Bayonet Mount
lens
Use the optional lens adaptor.
1
Attach the lens adaptor to the
camcorder.
Lens adaptor
(not supplied)
1 Align the alignment pin of the lens
adaptor with the recess at the top of the
mount section and set the adaptor in
place.
2 Turn the lens mount lever of the
camcorder downward. (Keep the lens
mount lever of the lens adaptor in the
upper position.)
2
Attach the lens.
Sony 1/2-inch Bayonet
Mount lens (optional)
1 Align the alignment pin of the lens with
the recess of the adaptor and set the lens
in place.
2 Turn the lens mount lever of the adaptor
downward.
Adjusting the Lens 27