Table of Contents
Advertisement
3.4.10.2
MPU Base Address
This parameter accepts the following values:
•
[300h]
•
[310h]
•
[320h]
•
[330h]
The default setting is [300h].
3.4.10.3
IRQ Setting
This parameter accepts 10, 7, 5 or 9 as its value. The default setting is [5].
3.4.10.4
DMA Channel
This parameter accepts 0, 1 or 3 as its value. The default setting is [0].
3.4.11
Reset PnP Resources
The system resources are already properly configured. If resource conflicts should arise, set this
parameter to [Yes] to reset the PnP resources and re-do allocation. The BIOS automatically sets
this to [No ] afterwards.
The default setting is [No ].
Advertisement
Table of Contents
