Ricoh B039 Service Manual page 512

Rev. 10/2002
⇒
FIRMWARE HISTORY
1. FIRMWARE MODIFICATION HISTORY
Please check the http://tsc.ricohcorp.com website for current firmware
!
downloads.
Engine firmware modification history information is provided in "Section 4.5
!
– Firmware Modification History" of the B039/B040/B043 Service Manual.
DESCRIPTION OF MODIFICATION
1st Mass Production
Nothing is displayed in the Dedicated Transmission
Parameter screen when Finnish has been selected
as the display language.
The colon (":") is not displayed between the switch
number and bit string for User Parameter SW 18
onward.
Titles are not listed in the Power Failure Report
(e.g. File, Time, Mode).
When system switch 1E bit 2 (RTI/CSI display
priority) = 1 (CSI), the machine displays "◦" at the
end of the other terminal's CSI.
e.g. +813123456789◦
With French set as the display language, the
following line is displayed twice if an undefined
character is entered for a Speed Dial search: Annu.
Tel.:[A] <>/OK.
(Normally, a 'not found'-type error message should
appear on the 2nd line).
In some cases, Substitute Reception files do not
appear on the Power Failure Report.
In some cases, part of the image data along the
main scan direction is missing with A3# B4
reduction Tx.
The list print does not stop, even when the
Clear/Stop key is pressed.
The center mark is missing when printing out Quick
Dial Labels.
SM
B404 FIRMWARE MODIFICATION HISTORY
8-1
FIRMWARE HISTORY
FIRMWARE SERIAL
LEVEL NUMBER
B4045582B 1st Mass
Production
B4045582C June '01
Production
B4045582D August '01
Production
FIRMWARE
VERSION
01.12.00
03.06.00
04.00.00
B404