Printer Controller Service Mode; Sm Appendix; Bit Switch Programming; Service Mode Menu ("1. Service Menu") - Ricoh M080 Service Manual

3. APPENDIX: SP MODE TABLES

3.1 PRINTER CONTROLLER SERVICE MODE

3.1.1 BIT SWITCH PROGRAMMING

1. Enter the sp mode, select "Service Menu", then press [Enter] twice.
2. Select #1, #2, #3, or #4 for the desired bit switch, then press [Enter].
[ ] [ ]: Move to the next switch.
3. Adjust the bit switch using the following keys.
[ ] [ ]: Move to the next bit.
[Escape]: Exit without saving changes.
[Enter]: Exit and save changes.
The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.

3.1.2 SERVICE MODE MENU ("1. SERVICE MENU")

1001 Bit Switch
001 Bit Switch 1
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 No I/O Timeout
Enables/Disables MFP I/O Timeouts. Enabled: The MFP I/O Timeout
setting will have no affect. I/O Timeouts will never occur.
bit 4
SD Card Save Mode
Enabled: Print jobs will be saved to an SD Card in the GW SD slot
( "Card Save Function" in the service tables of Field Service Manual).
bit 5 DFU
bit 6 DFU

SM Appendix

Printer Controller Service Mode
0
-
-
-
0: Disable
0: Disable
-
-
3-1
1
-
-
-
1: Enable
1: Enable
-
-
M080