Model Identification (Fig. 1B) - Studer XTH 3000-12 User Manual

Pos. Denomination
46 AC out
47

16 MODEL IDENTIFICATION (FIG. 1B)

Pos. Denomination
31 Model
32 Pnom/P30
33 U Battery
34 U ACin
35 I ACin/out
36 U ACout
37 I Charge
38 SN:xxxxxxxxxx
39 IPxx
User manual
Description Comments
Light indicator This indicator is glowing continuously when an
showing the alternative voltage of 230V is present at the device
presence of a output. It flashes when the device is in "load search"
voltage at the mode due to the absence of users. (See chapter
output 6.2.2 – p. 20)
Stop acoustic This button is not present on XTH.
alarm Note: The acoustic alarm duration {15656} is factory
set at 0 sec. and is so deactivated.
Description
Model
Rated power output / power for 30 minutes
Rated battery voltage (input area)
Rated AC input voltage (input area)
Maximum current at input / output
Rated output voltage
Maximum charger current
Serial no.
Protection degree according to IEC 60529
V.3.1.0
STUDER Innotec
Xtender
Comments
See chapter 6.2.8– p. 24
See chapter 6.2.3 – p.
20
See chapter 6.2.6 - p.
23.
Or according to {1286}
See chapter 6.2.4 - p.
21
39