Storing A Time To A Locate Point Using The Numeric Keys - Fostex DV40 Operation Manual

• Storing a time to a locate point using the numeric keys

You can recall and edit a locate point (CUE or MEMORY point) time and store the edited time.
1. While stopped, press a desired locate point key ([CUE POINT] or [MEMORY] key).
The display shows the locate bank and memory number (e.g. "Cue 03"), and a locate point time with
flashing memory number.
When pressing a locate point key ([CUE POINT] or [MEMORY] key) for the first time after turning on the
power, locate point memory "01" of the appropriate locate bank is shown.
H
ABS
MEMORY
1
2
∞
60 50 42 34 28 2018
Example after pressing the [MEMORY] key
2. Use the jog dial (or the numeric keys) to select a desired locate point memory number, and press a
desired locate point key ([CUE POINT] or [MEMORY] key) again.
The subframe value of the selected memory data starts flashing, showing that it can be edited.
There are two methods for time entry as described below.
<Note>
If you select a locate point memory number that does not hold time data, "--H--M--S--F--SF" is shown
and you cannot edit the time.
• Use the |<</>>| keys to move the flashing (edit) point, and use the jog dial to enter a value.
If the value of the edit point overruns or underruns, the value of the left digit increments or decrements
respectively.
• Use the numeric keys to enter a time directly.
Each number is entered from the right digit, which moves left as additional digits are entered.
For example, to enter "00H 12M 15S 00F 00SF", press 0 -> 0 -> 1 -> 2 -> 1 -> 5 -> 0 -> 0 -> 0 -> 0.
3. After completing time entry, press the [ENTER/YES] key.
The edited time data is stored to the selected locate point memory and the display returns to the Normal
screen.
Flashing
M S F SF
BIT
24
FS 48
kHz
CLOCK
-0.1%
12 8 6 5 4 3 2 1 0 OL
-INT-
FORMAT
BWF
H
CUE ABS
1
2
∞
60 50 42 34 28 2018
6-7
H
CUE ABS
1
2
∞
60 50 42 34 28 2018
Example after pressing the [CUE POINT] key
Flashing
M S F SF
BIT
24
FS
48
kHz
CLOCK
-0.1%
12 8
6 5 4 3 2 1 0 OL
-INT-
FORMAT
BWF
Flashing
M S F SF
BIT 24
FS
48
kHz
CLOCK
-0.1%
12 8 6 5 4 3 2 1 0 OL
-INT-
FORMAT
BWF