Fostex DV40 Operation Manual page 18

6. [LIST PLAY] ([EDIT]) key
LIST PLAY
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
EDIT
When a play list is recorded in the BMF file, pressing this key starts playback accord-
ing to the play list.
(Note that this function is not available with an SDII file.)
When SHIFTed:
Pressing this key enables editing of the recorded play list.
See "Executing a play list/Editing a play list" on page XX for details.
OPEN/CLOSE
7. [OPEN/CLOSE] key
Opens or closes the disk tray.
8. Transport keys
RECORD
a
a. [RECORD] key
Normally, pressing this key starts recording when one of the AUDIO RDY indicators
([NEW FILE] or [INSERT]) is lit.
• In the NEW FILE mode:
Starts recording to a new file which is automatically created. If the "TC RDY" indicator
is lit, timecode is also recorded.
• In the INSERT mode:
Starts recording from the current position of the current file. If the "TC RDY" indica-
tor is lit, timecode is also recorded.
See "Chapter 4: Audio recording/playback" and "Chapter 5: Timecode recording" for details.
<Note>
If you press the [RECORD] key when the "REC PROTECT" setting in the Utility mode is set to
"On" , "Protected!" is shown and you cannot start recording.
b. [STOP] key
Normally, pressing this key stops the recorder.
In the Setup, Utility and all sort of editing mode, pressing this key exits the current
mode.
Also, pressing the [PLAY], [<<REWIND] or [>>F FWD] key while holding down this key
executes the following.
• [STOP] + [PLAY]
Plays back sound data on the clipboard and stops the recorder.
• [STOP] + [<<REWIND]
Locates to ABS0 and stops the recorder.
• [STOP] + [>>F FWD]
Locates to REC END and stops the recorder.
STOP PLAY
REWIND
SOURCE PLAY
LOCATE ABS 0
LOCATE REC END
b c d
2-4
F FWD
e