Fostex DV40 Operation Manual page 132

9P-REMOTE/15P-REMOTE
• Connectors
• Protocol
* The 9P-REMOTE and 15P-REMOTE connectors are connected in parallel.
Controller Out
Pin No
DATA OUT
1
Frame Ground
2
Receive A
3 Transmit B
4 Transmit Common
5
Spare
6 Receive Common
7
Receive B
8
Transmit A
Frame Ground
9
10
11
12
13
14
15
ETHERNET
• Connector
* Conformed to IEEE 802.3, 10BASE-T and 100BASE-TX standards.
<Recording/playback>
• Recording drives
• Fs/quantization:
• Recording/playback freq. range: 20Hz~20kHz +/-1dB (FS 44.1/48kHz)
• S/N ratio
• Dynamic range
• Pitch control
• Crossfade
• Locate memories
<General>
• External dimensions
• Weight
• Power requirement
• Power consumption
: D-sub 9-pin (9P-REMOTE)
D-sub 15-pin (15P-REMOTE)
: RS-232C, conformed to the Sony 9-pin (P2) protocol
(The DV40 is a controlled device.)
D-sub 15P
D-sub 9P
DATA IN
DATA IN
Frame Ground Frame Ground
Transmit A Transmit A
Receive B
Receive B
Receive Common
Receive Common
Spare
Spare
Transmit Common Transmit Common
Transmit B Transmit B
Receive A
Receive A
Frame Ground Frame Ground
NC
NC
NC
NC
NC
+12V
: RJ-45
: E-IDE standard, DVD-RAM drive installed as a
standard.
2.5-inch hard disk drive also can be installed as an
option.
: 44.1/48kHz 16bit
44.1/48/88.2/96/176.4/192kHz 24bit
20Hz~40kHz +/-2dB (FS 88.2/96kHz)
20Hz~80kHz +/-3dB (FS 176.4/192kHz)
: 150 dB or more, 110 dB (typically)
: 105 dB or more, 110 dB (typically)
: +/-6% in 0.1 % steps
: default: 10 msec.
: MEMORY points: 100, CUE points: 99
: 141 (H) x 482 (W) x 381 (D) mm
: Approx. 7.4kg
: 120VAC 60Hz, 230V~ 50/60Hz (AC inlet type)
: 50W
14-4
A and B are defined as shown below.
B
T
A
Use a straight type cable.
+
R
-
A<B -> "1" (Mark)
B<A -> "0" (Space)