Fostex DV40 Operation Manual page 140

DV40 Owner's Manual <Version V1.2 Supplement>
Rotating the JOG dial (or press the [SKIP/CURSOR |<</>>| key]) displays various mode settings in the
following order with "Video FMT" as the center of rotation. ("Remake EDL?" will be the center of rotation
when editing an existing ADL file list.)
Tips:
The contents in "Video FMT?", "Sample FRQ?" and "TC Frame" settings are selected based on the
[SAMPLING FREQ] SW and [FRAME RATE] SW settings. The [SAMPLING FREQ] SW is set to "48/24bit"
and [FRAME RATE] SW to "29.97" respectively in the example below.
Current display
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
PGM
6
This menu should be selected when deleting an ALE
file list. (See page 13.)
This menu should be selected when remaking an ALE
file list. (See page 12.)
This menu should be selected when editing an ALE
file list. (See page 11.)
This menu should be selected when selecting an ALE
file list Video Format. (See page 7.)
This menu should be selected when selecting an ALE
file list Audio Format. (See page 7.)
This menu should be selected when editing an ALE
file list TAPE (Reel No). (See page 8.)
This menu should be selected when setting an ALE
file list TC Frame Rate. (See page 8.)
This menu should be selected when setting an on /
off of drop frame with 29.97 fps TC Frame Rate
selected. (See page 9.)
This menu should be selected when newly adding an
audio file to an ALE file list. The flashing 3-digit
number indicates the entry number. (See page 9.)