Unload Button - Fujitsu LTO-6 User Manual

Operating the Drive
5.3

Unload Button

The Unload Button (1 in
following functions:
Unload Button Function How to Initiate the Function
Rewind the tape into the
cartridge and eject the
cartridge from the drive
Table 3: Functions that the Unload Button performs
I
Maintenance mode is not supported. If the drive is in a maintenance
mode, power cycle the server.
28
"Front panel of drive" on page
Press the Unload Button once. The Ready/Activity status light
flashes green while the drive is rewinding and unloading.
I
During a rewind and eject operation, the drive does not
accept SCSI commands from the server.
13) performs the
LTO-6 Half-Height SAS Tape Drive