Fujitsu LTO-6 User Manual page 24

Operating the Drive
Mode
Executing Maintenance
Selection
Error Condition
Power-On / Reset Initialization random segments Off
Table 1: Status Light Modes
I
Maintenance mode is not supported. If the drive is in a maintenance
mode, power cycle the server.
The table 2 lists the conditions of the Status Lights and Single-character Display
(SCD) and provides an explanation of what each condition means.
If the green and the
Ready Status amber Fault
Light is... Status Light
is...
Off Off
Green/Solid Off
Flashing Off
Green (once
per second)
Table 2: Meaning of Status Lights and Single-character Display (SCD)
24
SCD
flashing character Off
solid character
and the SCD and the SCD
is... Dot is...
Off Off
Off Off
Off Off
Ready LED Fault LED
(green) (amber)
On
Off Flashing
On
Meaning
The drive has no power or
is powered off.
The drive is powered on
and in an idle state.
The drive is reading from
the tape, writing to the tape,
rewinding the tape, locating
data on the tape, loading
the tape, or unloading the
tape.
LTO-6 Half-Height SAS Tape Drive