Fujitsu LTO-6 User Manual page 27

If the green and the
Ready Status amber Fault
Light is... Status Light
is...
Off Flashing
Amber
Off Flashing
Amber
Off Flashing
Amber (twice
per second)
Off Solid Amber
Off Flashing
Amber (twice
per second)
1
Power should not be removed from the drive until the microcode update is complete. The
drive indicates that the update is complete by resetting and performing POST.
Table 2: Meaning of Status Lights and Single-character Display (SCD)
LTO-6 Half-Height SAS Tape Drive
and the SCD and the SCD
is... Dot is...
Displaying "C" Off
Displaying Off
Function
Code "2" or
Flashing
Off Off
Flashing "c" Off
Off On
Operating the Drive
Meaning
The drive needs cleaning.
The drive is updating
1
firmware. The SCD will
display a "2" if using an
FMR cartridge. The SCD
will be off if using the SCSI
interface. For more
information, see "Updating
Firmware" on page 33.
The drive detected an error
and is performing a
firmware recovery. It will
reset automatically.
The drive is requesting a
cartridge to be loaded.
There is a drive dump in
flash memory.
27