Fujitsu LTO-6 User Manual page 26

Operating the Drive
If the green and the
Ready Status amber Fault
Light is... Status Light
is...
Off / On Off / On
Off Flashing
Amber (once
per second)
Table 2: Meaning of Status Lights and Single-character Display (SCD)
26
and the SCD and the SCD
is... Dot is...
Displaying Off
random
segments/Bla
nk/displaying
random
segments/dis
playing "8"
/Blank
Displaying Off
error code
Meaning
During power on, or a drive
reset, the drive front panel
will display drive progress
as follows:
1. SCD will display
random segments
(no LEDS ON)
2. SCD will go blank
(LEDs - Green ON,
Amber OFF)
3. SCD will display
random segments
(LEDs - Green OFF,
Amber ON)
4. SCD will display [8]
(LEDs - Green OFF,
Amber ON)
5. SCD will go blank
(LEDs - Green ON,
Amber OFF) after a
successful power on or
reset.
If an error is detected
during the power on or
reset, the tape drive posts
an error code to the SCD.
To determine the error,
locate the code in
Codes and Messages" on
page 44.
An error occurred and the
drive or media may require
service, or it may require
cleaning. Note the code on
the SCD, then go to
Codes and Messages" on
page 44 to determine the
action that is required.
LTO-6 Half-Height SAS Tape Drive
"Error
"Error