Securing A Power Cord In The Psu Cable Bracket - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Basic hardware procedures

4.12.1.2 Securing a power cord in the PSU cable bracket

Figure 70: Securing power cords (A)
Ê Connect the power cords to the power supply units (1).
Ê Run the power cord through the PSU cable bracket as shown (2).
Ê Ensure that the PSU indicator on the PSU module lights up green.
I
For further information on the PSU operation status, refer to section
"PSU indicator" on page
134
906.
Upgrade and Maintenance Manual
TX300 S7 / RX350 S7