Renault Clio Cup User Manual page 8

2010 Release
Angle inspection
Preliminary checks
-
Before checking the axle angles, check (and correct if necessary) the following points:
 Tyre symmetry on a given axle:
• Pressure
• Wear
 Hinges:
• Condition of flexible bearings
• Ball joint clearance
• Bearing clearance
 Wheel run-out (max. 0.3mm)
 Body and cup height symmetry
Front axle diagnostics
-
Incident
Faulty castor angle
Camber + pivot correct overall, but:
- Individual faulty camber
- Individual pivot wrong.
Camber correct, but faulty pivot
Pivot correct, but faulty camber
Faulty variation in wheel alignment
Wheel alignment off by more than 6mm
Possible cause(s)
- Distorted wishbone
- Distorted side member or subframe-axle
- Distorted wishbone
- Distorted side member or subframe-axle
- Distorted pivot
- Distorted pivot
- Steering unit mounting on subframe
- Distorted left or right-hand hub carrier
E-8