Intermediate Shaft - Renault Clio Cup User Manual

2010 Release

4.4.2 INTERMEDIATE SHAFT

Removal
-
1 - Remove the folding yoke bell (1) (discard).
2 - Set the wheels straight.
3 - Remove the folding yoke bolt (7) (discard).
4 - Remove the folding yoke nut (discard).
Remove the intermediate shaft bolt (8) on the
5 -
column.
6 - Remove the intermediate shaft (9).
Refitting
-
Perform the removal steps in reverse order.
Systematically replace the folding yoke bolt (ref 77 03 602 097) and cam nut
after each removal.
Note: On a new intermediate shaft, the folding yoke cam nut is pre-assembled,
do not remove the bell.
Follow the direction of assembly of the folding yoke bolt and cam nut.
Tightening torques:
 Folding yoke bolt on steering box: 24Nm.
 Bolt on steering column: 32Nm.
Operations
E-33
Photos