Renault Clio Cup User Manual page 38

2010 Release
Removal
-
Remove the steering column (see previous
1 -
paragraph).
Remove the 4 unit mounting bolts (1) on the
2 -
steering column.
Remove the power steering module from the
column.
Note: keep the four spacers.
3 -
It is important not to run the EPS unit
when the column has been removed in
order to not offset the position sensor
(see 4-4 Steering/EPS unit).
Refitting
-
Refit the power steering module on the column, using the 4 spacers (ref 77
1 -
11 160 149).
2 - Tighten the 4 bolts (1) to 6Nm.
3 - Refit the column (see 4-4 Steering/Steering column).
Operations
Operations
E-38
Photo
1