Renault Clio Cup User Manual page 51

2010 Release
Refitting
-
Perform the removal steps in reverse order.
Tighten the amplifier and spacer bolts to
21Nm.
Check the dimension L = 171mm, adjustable
using the rod (C).
Drain the braking circuit.
Ensure that the braking amplifier gasket seal
(11) is present and replace it if faulty.
On each removal, systematically replace the
coupling shaft (ref 82 00 420 641) between
the braking amplifier thrust rod and the brake
pedal.
Ensure it is locked.
Check valve
Removal
-
1 - Disconnect the check valve from the brake booster.
Pull and rotate the valve to release it from the rubber
2 -
sealing washer.
Refitting
-
Perform the removal steps in reverse order.
Check the condition of the sealing washer and check valve and replace them if necessary.
Take care not to push the sealing washer into the braking amplifier when inserting
the valve.
Operation
E-51
Photo