2010 Release
4.3.4 REAR LOAD-BEARING COMPONENTS
Hub
See 4-5 Brake System/Rear brakes/Hub disc.
Damper system
Removal
-
Place the vehicle on a jack stand on the appropriate
1 -
side.
2 - Remove the wheel.
3 - Remove the lower mounting bolt (1).
4 - Remove the upper mounting nut (2).
5 - Remove the damper system.
Refitting
-
Perform the removal steps in reverse order.
Tightening torques:
Lower mounting bolt: 105Nm.
Upper mounting bolt: 80Nm.
Operations
E-26
Photos
1
2