TANDBERG Educator & Professional MXP Instructions Manual page 56

TANDBERG Educator & Professional MXP Videoconferencing System
Touch N Talk
Configuration
D50326.05
This presents your options to configure the Touch N Talk microphones to switch to the MAIN,
SECOND, or AUXILIARY camera (if the Aux Cam is enabled).
After selecting the Touch N Talk configuration button the first 20 microphone button are seen, the
other 20 can be accessed by selecting the MORE buttons.
Selecting a microphone button will display a RED MESSAGE BOX in which the camera source and
its preset can be configured. Use the UP and DOWN arrow keys to scroll through the camera 40
preset the preset name is shown in the text window. Select OK to confirm the configuration.
RESTORE DEFAULTS will reset all the Touch N Talk microphones to switch to the main camera
and the camera preset 1 over the microphone number. IE, microphone 1 will call main camera
preset 2.
An ACTIVE TOUCH N TALK indicator is also provided above the restore default button.
TOUCH PANEL OPERATION
56