TANDBERG Educator & Professional MXP Instructions Manual page 45

TANDBERG Educator & Professional MXP Videoconferencing System
4.3.3 MultiSite
The optional MultiSite capability enables several sites to participate in the same conference. You can have a
maximum of 6 video- and 5 telephone-participants including yourself (the host). The participants are tiled up on
the screen and are on display simultaneously in a Split Screen. During an MCU conference, the status line will
provide information about the conference.
You can connect a MultiSite conference in different ways. The MultiSite Services vary depending on how you
make the call. Refer to the TANDBERG 6000 MXP User Manual for more about MultiSite and MCU Services.
1. While in a call, press CALL CONTROL and select a directory entry or enter a number manually.
2. Press CALL NOW to connect. Notice that, unlike a single call, the touch panel will remain on the CALL
CONTROL page and not move to the MAIN CONFERENCE page.
Repeat steps 1 and 2 if you would like to connect additional sites. You can add a site at any time by
entering the CALL CONTROL page.
3. Press RETURN to return to the MAIN conference page.
4. Press MULTISITE to enter the MultiSite control page.
D50326.05
TOUCH PANEL OPERATION
45