TANDBERG Educator & Professional MXP Instructions Manual page 37

TANDBERG Educator & Professional MXP Videoconferencing System
Call Utilities
These options are available to provide support in a call:
Tel. Add
Touch Tones
Streaming
Taskbar
This area provides the necessary controls for call control, as well as system utilities. Different functions
will be available when applicable.
Return
DuoVideo
Call Status
Audio
Home
Utilities
D50326.05
It is possible to connect a telephone (POTS) as part of the conference call. This is an option – please
consult your TANDBERG representative.
When in a call, pressing this button brings up a touchpad for you to enter additional numbers, such as
extension numbers, that require touch tones. See
Activates and deactivates streaming. You can also activate streaming through UTILITIES > STREAM
CONTROLS.
Refer the 'TANDBERG 6000 MXP Manual' for Streaming details.
Returns to Main Page
When in a call, initiates or ends DuoVideo
When in a call, provides call status and options to add site, disconnect a particular site, or disconnect
all sites.
Adjust audio level within room. Select up to increase and down to decrease volume. Press the audio
button to toggle mic mute.
Returns the user to the Main Page and resets the system to a known default state – resets audio to a
mid-range level and switches the video source to show the Main Camera source.
Provides access to secondary conference controls (i.e. standby settings, system tools, system setup,
and Do-Not-Disturb mode.)
TOUCH PANEL OPERATION
Touch Tones for more information,
37