TANDBERG Educator & Professional MXP Instructions Manual page 35

TANDBERG Educator & Professional MXP Videoconferencing System
Controls
Semi-transparent controls which are associated with the currently selected source are overlaid on the
video window. These source controls can be configured to persist or fade after a few seconds. See
System Setup for configuration options.
Main Source Selection
This area provides available sources to select from during presentation. The source names can be
modified by the system administrator.
Taskbar
This area provides the necessary controls for presentation, as well as call control. Different functions
will be available when applicable.
Call Control
DuoVideo
Disconnect
Layout
Controls
Far End
Audio
Home
Utilities
D50326.05
Access Call Controls
When in a call, initiates or ends DuoVideo. Refer to the TANDBERG Codec User Manual for detailed
information about DuoVideo.
When in a call, pressing this button disconnects a call
Shows the video display layout options for the LOCAL view. Pressing this button repeatedly will
toggle through several layout options.
Displays set of controls associated with currently selected source
When in call, provides Far End Camera Control (FECC)
Adjust audio level within room. Select up to increase and down to decrease volume. Press the audio
button to toggle Mic Mute. A Custom Mute option may also be available if configured in Utilities >
System Setup > AUDIO SETUP.
Returns the user to the Main Page and resets the system to a known default state – resets audio to a
mid-range level and switches the video source to show the Main Camera source.
The Utilities button provides access to secondary conference controls (i.e. standby settings, system
tools, system setup, and Do-Not-Disturb mode.)
TOUCH PANEL OPERATION
35