On-Screen Indicators - TANDBERG Educator & Professional MXP Instructions Manual

TANDBERG Educator & Professional MXP Videoconferencing System

3.1.3 On-Screen Indicators

The system has a number of icons signalling different settings:
Volume Off
This indicator is shown when the volume is turned off. Press Volume + to turn the volume back on.
Microphone Off
This indicator is shown when the microphone is turned off. The indicator will start to flash if audio is
detected in the room during a call and the microphone is turned off. Press the Mic off button again to turn
the microphone back on.
Secure Conference, AES
This double padlock indicator is shown when AES encryption (Secure Conference) is active.
Secure Conference, DES
This Padlock indicator is shown when DES encryption (Secure Conference) is active.
Not Secure Conference
This open padlock indicator is shown during the initialization phase for encryption. During this period the
call is not secure.
Floor
This indicator is shown when you are displayed in full screen in a multipoint conference.
Participating Telephone
This indicator is shown when there are 1 or more telephone participants in the conference.
D50326.05
GENERAL USE
30