Chapter 5: Prepare For Configuration; Establishing A Console Connection - Avaya P333R-LB Quick Start Installation Manual

Chapter 5: Prepare for Configuration

This chapter provides information on preparing the P333R for configuration, and discusses the
following topics:

Establishing a Console Connection

●
Assigning a P333R-LB IP Stack Address
●
Assigning the Initial Router IP Address
●
Establishing a Telnet Connection
●
Configuring the Switch
●
Establishing a Console Connection
This section describes the procedure for establishing switch access between a terminal and the
Avaya P333R-LB switch over the serial port provided on the front panel of the P333R-LB (RJ-45
connector labeled "Console"). For information on the console port pin assignments, refer to the
Avaya P333T User Guide.
Figure 6: Avaya P333R-LB Console Port
Figure notes:
1. Console port
1. Use the serial cable supplied to attach the RJ-45 console connector to the Console port of
the active P333R-LB switch. Connect the DB-9 connector to the serial (COM) port on your
PC/terminal.
- The master P333R-LB is indicated by the SYS LED being ON.
1
Issue 1 September 2005 23