Chapter 5: Prepare For Configuration; Establishing A Console Connection - Avaya C360 Quick Start For Hardware Installation

Chapter 5: Prepare for Configuration

This chapter provides information on preparing the C360 for configuration, and discusses the
following topics:

Establishing a Console Connection

●
Assigning a C360 IP Stack Address
●
Establishing a Telnet Connection
●
Configuring the Switch
●
Establishing a Console Connection
This section describes the procedure for establishing switch access between a terminal and the
Avaya C360 switch over the serial port provided on the front panel of the C360 (RJ-45
connector labeled "Console"). For information on the console port pin assignments, refer to the
Avaya C360 Installation and Maintenance User Guide.
Figure 7: Avaya C360 Console Port
Figure notes:
1. Console port
1
Issue 2 September 2005 25